Design |
Overview of technical data
| Type of impeller | Closed / Radial |
| Type of installation | Close- coupled |
| Impeller material (EN standard) | 1. 4408;CC480K-GS;JL1040 |
| Type of bearing | Ball bearings |
| Drive frequency | 50 Hz / 60 Hz |
| Maximum speed of rotation | 1. 750 1/min |
| Maximum flow rate | 1. 900 m³/h |
| Casing material (EN standard) | JL1040; JS 1025 |
| Casing material | Carbon steel |
| Minimum flow rate | 60 m³/h |
| Suction characteristics | Non- priming |
| Drive voltage | Low voltage |
| eClass assignment | 36410000; 36410100;36410101;36410105 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Max. permissible fluid temperature | 140 °C |
| Main applications | Industry and process engineering; Water;Building services |
| Type of installation | Stationary |
| Type of casing | Volute casing |
| Type of connection | Flange |
| Type of lubrication | Oil lubrication |
| Type of drive | Electric motor |
| Installation position | Horizontal or vertical |
| Shaft material (EN standard) | 1. 4057;C45 |
| Type of coupling | Direct |
| Shaft seal type | 00 |
| Drive | IEC standardized motor, electric motor |
| Maximum head | 97, 00 m |
| Maximum rated pressure (discharge) | PN25 |
| Nozzle position | In- line |
| Casing partition | Radially split |
| Connection to power supply | 400 V, 3~ |