| Model No. cnc milling machine 5 axis | ME1300 | ME1500 | ME1600 | ME1800 | VF-2010 | |
| Capacity | X axis travel/mm | 1300 | 1500 | 1600 | 1800 | 2100 |
| Y axis travel/mm | 700 | 800 | 900 | 920 | 1050 | |
| Z axis travel/mm | 610 | 700 | 700 | 700 | 1100 | |
| Spindle nose to table surface/mm | 150-760 | 170-870 | 180-880 | 180-880 | 300-1400 | |
| Spindle nose to column surface/mm | 785 | 880 | 980 | 1025 | 1100 | |
| Worktable | Table size/(L*W) | 1400*650 | 1700x800 | 1700*800 | 1900*900 | 2200*1000 |
| Max load on the table/kg | 1000 | 1500 | 2200 | 3000 | 5000 | |
| T-slot size/mm | 18*5*100 | 22x5x135 | 22*5*135 | 22*7*120 | 22*7*125 | |
| Spindle | Spindle speed/rpm | 6000 | 6000 | 6000 | 6000 | 6000 |
| Spindle taper/spindle shank | 7:24 Taper BT40 | 7/24 Taper BT50 | 7:24 Taper BT50 | 7:24 Taper BT50 | 7:24 Taper BT50 | |
| Max spindle inner diameter/mm | Φ80 | Φ80 | Φ100 | Φ100 | Φ100 | |
| Spindle motor(30 mins,mitsubishi)/kw | 11 | 11/15 | 15/18.5 | 15/18.5 | 15/18.5 | |
| X,Y,Z rapid traverse/M/min | 18/18/15 | 18/18/15 | 15/15/12 | 15/15/12 | 15/15/12 | |
| Feed rate | Max cutting feed rate(M/min) | 10 | 10 | 6 | 6 | 6 |
| A.T.C | Guide rail types | hard guide rails | Hard guide rails | Hard guide rails | Hard guide rails | Hard guide rails |
| Tool storage capacity/pc | Arm type 24 | Arm type 24 | Arm type 24 | Arm type 24 | Arm type 24 | |
| Max tool diameter(adjacent tools)/mm | Φ150(80) | Φ150(80) | Φ150(80) | Φ150(80) | Φ150(80) | |
| Max tool length/mm | 300 | 300 | 300 | 300 | 300 | |
| Max tool weight/kg | 8 | 8 | 8 | 8 | 8 | |
| Tool change time(T-T)/sec | 2.5 | 3.5 | 3.5 | 3.5 | 3.5 | |
| Accuracy | Positioning accuracy/mm | 0.01〈2000 | 0.015<2000 | 0.015<2000 | 0.015<2000 | 0.015<2000 |
| Repeatability positioning accuracy/mm | 0.005 | 0.008 | 0.006 | 0.006 | 0.006 | |
| Machine size | Machine height/mm | 2500 | 2550 | 2550 | 2770 | 2850 |
| Space requirement(L*W) | 3900*2730 | 4250x3250 | 4910*3500 | 4960*3500 | 5490*3600 | |
| Net machine weight/kg | 10000 | 12000 | 12500 | 14200 | 16000 | |
| Power requirement/KVA | 30 | 40 | 45 | 45 | 45 | |
| Air pressure/kg/cm2 | 5-7 | 5-7 | 5-7 | 5-7 | 5-7 | |
| Drive motor/kw | 2.0/3.5/2.0 | 4.0/4.0/4.0 | 4.0/7.0/4.0 | 4.0/7.0/4.0 | 4.0/7.0/4.0 | |
| Control system | F-0iMD/M70 | F-0iMD/M70 | F-0iMD/M70 | F-0iMD/M70 | F-0iMD/M70 | |
Original machine configuration cnc milling machine 5 axis | 1.Control system: Mitsubishi M70, |
| 2.Arm type A.T.C system(24 tools) | |
| 4.screw rod chip removal system | |
| 5.heat exchanger | |
| 6.triaxial screw rod with function of pre-pull | |
| 7.automacti lubrication system | |
| 8.work& alarm lamps | |
| 9.rigid tapping | |
| 10.steel telescopic covers for guide rails | |
| 11.dirt-proof electrical cabinet | |
| 12.paralell and tool box | |
| 13.220/380v,50HZ transformer | |
| 14.belt-type 6000rpm spindle, 7/24 Taper No. 50 , | |
| 15.spindle blowing device | |
| 16.fully enclosed splash guard | |
| 17.device for clamping/releasing tool | |
| 18.cutting fluid system and coolant system | |
| 19.hard guide rails | |
Main components supplier cnc milling machine 5 axis | 1. controller: Mitsubishi controller from Japan |
| 2. spindle motor: Mitsubishi AC servo motor from Japan | |
| 3. x. y. z axis motor: Mitsubishi AC servo motor from Japan | |
| 4. spindle bearing: NSK (P4 grade) from Japan | |
| 5. x, y, z axis bearings: NSK (P4 grade) from Japan | |
| 6. x, y, z axis ball screw: HIWIN(C 3 grade) from Taiwan | |
| 7. spindle: Kenturn brand from China Taiwan | |
| 8. A.T.C: made in China Taiwan | |
| 9. cylinder: made in China Taiwan | |
| 10. heat exchanger: made in China Taiwan |